Testing and validating underground hydrogen storage components
UK registered organisations can apply for a share of up to £5 million for a collaborative programme to accelerate the development and validation of critical technologies needed for the safe, reliable and cost effective use of underground hydrogen storage.
Eligibility:
This competition is open to collaborations only.
Opens: Friday 23 October 2026
Closes: Wednesday 27 January 2027 11:00am
Description
UK Research and Innovation (UKRI) will invest up to £5 million from the R&D Missions Accelerator Programme (RDMAP) in a collaborative research and development programme. The programme will accelerate the development and validation of critical technologies needed for the safe, reliable and cost effective use of underground hydrogen storage.
This competition responds directly to the recently launched Ultra Long Duration Energy Storage ULDES Challenge. The ULDES challenge will accelerate the UK’s commercialisation, manufacture and deployment of innovative and affordable long duration energy storage technologies with a duration over 100 hours. The ULDES challenge as a whole has up to £28 million to invest up to 2030, split between electrochemical and hydrogen for storage activities.
This competition sits alongside a separate £1.5 million competition that will provide funding for development expenditure projects to accelerate UHS projects towards final investment decision.
The aim of this competition is to fund a consortium programme which will enable the UK to accelerate the development and validation of critical technologies needed for the safe, reliable and cost effective use of hydrogen in ULDES within the UK electricity sector. This should enable components to be used in commercial settings within a 2030 timeline. The awarded consortium should work as one cohesive programme, containing the skills and expertise to deliver the competition aim.
Your proposal must be relevant to underground hydrogen storage (UHS) conditions. It should be technology agnostic across UHS technologies whilst remaining capable of meeting the requirements of the ULDES Challenge statement, to ensure developments remain relevant across a range of UK UHS futures.
The UKRI R&D Missions Accelerator Programme are running two competitions across UHS:
Testing and validating underground hydrogen storage components (this competition)
Underground hydrogen storage demonstrator: DEVEX support
It is your responsibility to ensure you submit your application to the correct competition for your project. You will not be able to transfer your application, and it will not be sent for assessment if it is out of scope.
We expect funded projects from both competitions to work together where appropriate. We will provide further information to successful applicants after funding decisions have been made.
In applying to this competition, you are entering into a competitive process. This competition has a funding limit, so we may not be able to fund all the proposed projects. It may be the case that your project scores highly, but we are still unable to fund it.
Our experience from similar competitions suggests that you could have 20% chance of success.
We consider a range of factors when determining whether to provide funding to applicants. This includes an assessment of prior conduct, such as any outstanding payments owed to Innovate UK or UKRI. Such factors may influence the funding decision, potentially resulting in a refusal of funding or an award subject to additional scrutiny.
We also reserve the right to adjust funding allocations for any of our competitions. This may be in response to changes in policy, portfolio funding considerations or broader government funding decisions.
This competition closes at 11am UK time on the deadline stated in this Innovate UK competition brief. We cannot guarantee other government or third party sites will always show the correct competition information.
Funding type
Grant
Project size
Your project’s total eligible grant funding request must be between £2.5 million and £5 million. Within a consortium, a single enterprise cannot request more than £3 million in grant funding from this competition.
Accessibility and Inclusion
We welcome and encourage applications from people of all backgrounds and are committed to making our application process accessible to everyone. This includes making reasonable adjustments for people who have a disability or a long-term condition and face barriers applying to us.
You can contact us at any time to ask for guidance.
We recommend you contact us at least 15 working days before this competition’s closing date to allow us to put the most suitable support in place. The support we can provide may be limited if you contact us close to the competition deadline.
You can contact Innovate UK by email or call 0300 321 4357. Our phone lines are open from 9am to 12pm and 2pm to 5pm UK time, Monday to Friday (excluding bank holidays).
This competition is open during the Christmas holiday period. However, UKRI and Innovate UK will have limited capacity to respond to queries.
We will not respond to queries received between 23 December 2026 and 4 January 2027. Responses may also be delayed after 18 December 2026.
Submit any queries well in advance of this period to allow sufficient time for a response.
Who can apply
Your project
Your project must:
be collaborative
have total eligible grant funding request between £2.5 million and £5 million
start on 1 May 2027
end by 30 November 2029
last between 24 and 30 months
address all three technical themes in the competition scope
The £3 million maximum applies at enterprise level. Applicants must take account of linked enterprises and any other relevant subsidy received for the same project or activity.
The streamlined scheme requires subsidies for the same enterprise, project and substantially the same purpose to be considered cumulatively. Its limits cannot be circumvented by artificially dividing a single project into multiple constituent projects.
Any organisation receiving funding must carry out its project work in the UK, intend to exploit the results in the UK, and spend most of the funding within the UK.
Projects must always start on the first of the month, even if this is a non-working day. You must not start your project until your Grant Offer Letter has been approved by Innovate UK. Any delays within Project Setup may mean we need to delay your project start date.
Your project must not start before the intended project start date unless UKRI has provided written authorisation.
You must only include eligible project costs in your application. See our overview of eligible project costs.
If your project’s grant funding request or duration falls outside of our eligibility criteria, you must provide justification by email to support@iuk.ukri.org at least 10 working days before the competition closes. We will then decide whether to approve your request.
If your project does not meet our criteria and you have not requested justification approval, your application will be made ineligible and it will not be sent for assessment.
Lead organisation
To lead a collaborative project, your organisation must be a UK registered:
business of any size
research and technology organisation (RTO), provided you can demonstrate appropriate commercialisation expertise
academic institution, provided you can demonstrate appropriate commercialisation expertise within the consortia
The lead organisation of the consortium must:
be responsible for the overall delivery of the programme, though support from a partner with programme management expertise is acceptable
manage the consortium and relationships between work packages
demonstrate appropriate financial standing and programme management capability
have authority to enter into a collaboration agreement with all project partners
demonstrate how project outcomes will be exploited or supported towards exploitation in or from the UK
If the lead is a business, it must be registered at Companies House before applying. Certain registration types, including registrations with FC or BR prefixes, are not treated as eligible UK registered businesses under Innovate UK’s general funding guidance.
More information on the different types of organisation can be found in our Funding rules.
Project team
To collaborate with the lead, your organisation must be one of the following UK registered:
business of any size
an academic institution
research, technology organisation (RTO)
charity
not for profit
public sector organisation
The consortium must include the organisations, expertise, facilities and routes to adoption needed to deliver the full programme.
We expect this to include, where relevant, expertise that covers:
hydrogen storage technology developers
component and equipment manufacturers
materials specialists
compressor developers or suppliers
metering and monitoring technology developers
storage developers or operators
end users
research organisations where appropriate
testing and validation facilities
standards and certification organisations
safety and regulatory expertise
supply chain and manufacturing partners
Your consortium must include:
at least two grant claiming partners
an end user, storage developer, or operator, or supporting letters from this type of organisation
UK based testing and certification organisations where suitable capacity exists, or supporting letters from this type of organisation
Businesses, academic institutions, charities, not-for-profits, public sector organisations and RTOs may participate, subject to the competition specific eligibility rules and the organisation’s role in the project.
Non-UK organisations may participate as subcontractors or non-grant-claiming partners where they provide essential capability that is not reasonably available in the UK.
Each partner organisation must be invited into the Innovation Funding Service (IFS) by the lead to collaborate on a project. Once partners have accepted the invitation, they will be asked to login or to create an account in the IFS. They are responsible for entering their own project costs and completing their Project Impact questions in the application.
To be an eligible collaboration:
the lead and at least one other organisation must request funding
you must explain why you’re collaborating and how the collaboration will work
Non-funded partners
Your project can include organisations who do not claim any funding for their work on the project. Their costs will be covered from their own resources. These can only include those from the UK, EU and other non-UK organisations. Non-UK partners are permitted to carry out project work from within their home countries and exploit the results outside the UK.
Where non-funded partners have been invited to the application on IFS, their costs will count towards the total eligible project costs.
Subcontractors
Subcontractors are allowed in this competition.
Subcontractors can be from anywhere in the UK and you must select them through your usual procurement process.
You can use subcontractors from overseas but must make the case in your application as to why you cannot use subcontractors from the UK.
You must provide a detailed rationale, evidence of the potential UK contractors you approached and the r
Your proposal
The aim of this competition is to fund a consortium programme which will enable the UK to accelerate the development and validation of critical technologies needed for the safe, reliable and cost-effective use of hydrogen in ULDES within the UK electricity sector. This should enable components to be used in commercial settings within a 2030 timeline. The awarded consortium should work as one cohesive programme, containing the skills and expertise to deliver the competition aim.
Solutions must be relevant to underground hydrogen storage (UHS) conditions, though should be technology agnostic across the various UHS technologies capable of meeting the requirements of the challenge statement.
Hydrogen based ULDES has the potential to contribute to a resilient, flexible and decarbonised UK energy system. However, further innovation and technical evidence are needed to address challenges associated with materials compatibility, compression, component performance, metering, monitoring, containment and system integrity. This innovation needs to be addressed using a coordinated approach, to avoid duplication across thematic areas and allow developments in each area to be readily available to accelerate the others, to support the 2030 ambitions of the UKRI ultra long duration energy storage challenge.
Your project must bring together a multidisciplinary consortium capable of delivering a single, cohesive programme across the following three technical themes:
materials
compressors
components for metering and monitoring
Your project must also include:
an overarching programme management work package
cross cutting validation and certification activity
representative testing of technologies and components
meaningful engagement with relevant standards, certification and regulatory organisations
considerations of supply chain capabilities, dependencies and scalability
meaningful engagement with end users, storage developers, or operators
dissemination of technical evidence and learning
a credible route to exploitation, deployment and further commercial development in or from the UK
Programme approach
Your proposal must present one integrated programme containing, as a minimum:
Work package 0: programme management and integration
Work package 1: materials
Work package 2: compressors
Work package 3: components for metering and monitoring
Work package 4: cross-cutting validation, certification and standards
Work package 5: dissemination, exploitation and knowledge transfer
Alternative work package structures will be accepted if they clearly address every requirement and retain a coherent cross programme approach.
Programme management costs should not normally exceed 10% of the grant requested. Applicants must justify these costs and can distinguish overarching programme management from additional proportionate technical management within individual work packages.
Specific themes
Theme 1: Materials
Your project must develop and evaluate materials for underground hydrogen storage and associated equipment under relevant operational conditions.
This may include, but is not limited to:
liners
steels
cements
tubing
elastomers
casings
safety valves
packers
seals and other containment components
lower cost materials or manufacturing approaches
Your project can:
test and improve material compatibility with hydrogen under representative underground hydrogen storage operating conditions
investigate fatigue, degradation, integrity and containment
consider exposure to relevant fluids, brines, impurities and hydrogen sulphide, where applicable
develop models and tools that support lifetime and maintenance decisions
improve performance, cost, durability, reliability, manufacturability and scalability
generate evidence to support applicable standards and certification
identify credible routes to manufacture, scale-up and commercial deployment
Theme 2: Compressors
Your project must develop or improve compressor technologies suitable for hydrogen ULDES applications.
This may include, but is not limited to:
novel compressors
hybrid compressor systems
improvements to existing compressor designs
lower-cost compressor technologies
control, diagnostics and predictive-maintenance approaches
Your project can:
test and improve performance, energy efficiency, reliability, durability and safety at under representative underground hydrogen storage operating conditions
consider relevant cycling rates, flow rates, inlet and discharge pressures, ramp rates and considering tolerance to impurities and contaminants
improve whole life costs
generate evidence to support applicable standards and certification
identify credible routes to manufacture, scale up and commercial deployment
Theme 3: Components for metering and monitoring
Your project must develop and test tools, methods or components for measuring and monitoring the performance and integrity of hydrogen ULDES systems.
This may include:
measurement of rock mechanical response
monitoring of material degradation
hydrogen containment monitoring
surface and subsurface leakage detection
gas-flow measurement
condition monitoring
integration of sensing, data and diagnostic systems
Your project can:
define relevant accuracy, sensitivity and performance requirements
evaluate performance and degradation under representative conditions
address calibration and reliability
consider integration into operational storage systems
support predictive maintenance and risk management
generate evidence relevant to standards, certification and assurance
identify routes to manufacture, scale up and deployment
Cross-cutting aspects, validation, certification and standards
Your project must include a coherent approach to cross cutting aspects. This includes supply chain considerations as well as validation and certification. Projects should generate evidence to support compliance with relevant regulatory, standards and certification requirements, such as:
Health and Safety Executive (HSE)
the Envi
23 October 2026
Competition opens
28 October 2026
Online briefing event: watch the recording.
Briefing slides are now available to download in supporting information.
2 November 2026
Surgery session with Innovate UK Business Connect 11am: register to attend
27 January 2027 11:00am
Competition closes
26 February 2027
Invite to interview
16 March 2027
Interview panel starts
22 March 2027
Interview panel ends
31 March 2027
Applicants notified
1 June 2027
Project start on
Before you start
29/10/2026 Text update: Update to Question 10. Skills: assessor guidance and scoring
You must read the guidance on applying for a competition on the Innovation Funding Service before you start.
Before submitting, it is the lead applicant’s responsibility to make sure:
that all the information provided in the application is correct
your proposal meets the eligibility and scope criteria
all sections of the application are marked as complete
that all partners have completed all assigned sections and accepted the terms and conditions (T&Cs)
You can reopen your application once submitted, up until the competition deadline. You must resubmit the application before the competition deadline.
What we ask you
The application is split into four sections:
Project details.
Application questions.
Finances.
Project Impact.
Accessibility and Inclusion
We welcome and encourage applications from people of all backgrounds and are committed to making our application process accessible to everyone. This includes making reasonable adjustments for people who have a disability or a long-term condition and face barriers applying to us.
You can contact us at any time to ask for guidance.
We recommend you contact us at least 15 working days before this competition’s closing date to allow us to put the most suitable support in place. The support we can provide may be limited if you contact us close to the competition deadline.
You can contact Innovate UK by email or call 0300 321 4357. Our phone lines are open from 9am to 12pm and 2pm to 5pm UK time, Monday to Friday (excluding bank holidays).
This competition is open during the Christmas holiday period. However, UKRI and Innovate UK will have limited capacity to respond to queries.
We will not respond to queries received between 23 December 2026 and 4 January 2027. Responses may also be delayed after 18 December 2026.
Submit any queries well in advance of this period to allow sufficient time for a response.
1. Project details
This section provides background for your application and is not scored.
Do not include any website addresses (URLs) in your answers.
Application team
Decide which organisations will work with you on your project and i
Wijzigingsgeschiedenis
First seen 15 Nov 2026, last checked 22 Nov 2026. 2 recorded versions.
- 21 Nov 2026 · 65897f68c377
- 15 Nov 2026 · ba545935f959