Battery Innovation: Concept Development Rd 3
UK registered businesses can apply for a share of up to £25 million to support innovation in battery grade material technologies for electrification. This funding is from The Battery Innovation Programme.
Eligibility:
This competition is open to collaborations only.
To lead a collaborative project your organisation must be a UK registered business of any size. The consortium must contain at least one UK registered micro, small or medium sized enterprise (SME) claiming grant funding on this application.
Opens: Friday 11 September 2026
Closes: Wednesday 2 December 2026 11:00am
Description
Innovate UK, part of UK Research and Innovation (UKRI), is delivering the Battery Innovation Programme on behalf of the Department for Business, Innovation, Science and Trade (BIST). The programme will invest up to £25 million in innovation projects. This is subject to a sufficient number of high quality applications being received.
The aim of this competition is to:
support collaborative R&D in strategically critical areas of the UK battery value chain
strengthen UK capability in battery cell manufacturing, pack manufacturing including high performance cell technologies, automated manufacturing techniques, non-destructive testing, AI driven design and simulation of manufacturing processes
strengthen UK supply chain security and build resilient, multi sector manufacturing capability
support supply chain localisation to align with rules of origin requirements and UK’s strategic priorities
This is to address key capability gaps limiting the UK’s ability to:
scale UK battery cell manufacturing
develop UK battery module and pack manufacturing
improve battery systems
capture greater economic value domestically
Your project must demonstrate how the proposed innovation will do at least one of the following:
enable improvements to manufacturing processes for large-scale battery cell production
expand industrial development of battery module technologies
develop high performance and efficient battery pack and battery management system (BMS) technologies
reduce dependence on overseas cell and pack manufacturers and strengthen UK supply chain resilience
demonstrate the results of AI supported design across cell and pack development
support scale-up from laboratory to pilot and pre-commercial manufacturing within the UK
This competition is split into two strands:
Battery innovation concept development round 3 (this strand)
Battery innovation feasibility studies round 3
It is your responsibility to ensure you submit your application to the correct strand for your project. You will not be able to transfer your application, and it will not be sent for assessment if it is out of scope.
In applying to this competition, you are entering into a competitive process. This competition has a funding limit, so we may not be able to fund all the proposed projects. It may be the case that your project scores highly, but we are still unable to fund it.
Our experience from similar competitions suggests that you could have 25% chance of success.
We consider a range of factors when determining whether to provide funding to applicants. This includes an assessment of prior conduct, such as any outstanding payments owed to Innovate UK or UKRI. Such factors may influence the funding decision, potentially resulting in a refusal of funding or an award subject to additional scrutiny.
We also reserve the right to adjust funding allocations for any of our competitions. This may be in response to changes in policy, portfolio funding considerations or broader government funding decisions.
This competition closes at 11am UK time on the deadline stated in this Innovate UK competition brief. We cannot guarantee other government, or third party sites will always show the correct competition information.
Funding type
Grant
Project size
Your project’s total eligible grant funding request must be between £500,000 and £4 million.
Accessibility and Inclusion
We welcome and encourage applications from people of all backgrounds and are committed to making our application process accessible to everyone. This includes making reasonable adjustments for people who have a disability or a long-term condition and face barriers applying to us.
You can contact us at any time to ask for guidance.
We recommend you contact us at least 15 working days before this competition’s closing date to allow us to put the most suitable support in place. The support we can provide may be limited if you contact us close to the competition deadline.
You can contact Innovate UK by email or call 0300 321 4357. Our phone lines are open from 9am to 12pm and 2pm to 5pm UK time, Monday to Friday (excluding bank holidays).
Who can apply
Your project
Your project must:
have grant funding request of between £500,000 and £4 million
last between 12 and 36 months
not start before 1 May 2027
end by 31 March 2031
Any organisation receiving funding must carry out its project work in the UK, intend to exploit the results in the UK, and spend most of the funding within the UK.
Projects must always start on the first of the month, even if this is a non-working day. You must not start your project until your Grant Offer Letter has been approved by Innovate UK. Any delays within Project Setup may mean we need to delay your project start date.
You must only include eligible project costs in your application. See our overview of eligible project costs.
If your project’s grant funding request or duration falls outside of our eligibility criteria, you must provide justification by email to support@iuk.ukri.org at least 10 working days before the competition closes. We will then decide whether to approve your request.
If your project does not meet our criteria and you have not requested justification approval, your application will be made ineligible, and it will not be sent for assessment.
Lead organisation
To lead a collaborative project your organisation must be a UK registered business of any size. The consortium must contain at least one UK registered micro, small or medium sized enterprise (SME) claiming grant funding on this application.
More information on the different types of organisation can be found in our Funding rules.
Academic institutions cannot lead.
Project team
To collaborate with the lead, your organisation must be one of the following UK registered:
business of any size
academic institution
charity
not for profit
public sector organisation
research and technology organisation (RTO)
Each partner organisation must be invited into the Innovation Funding Service (IFS) by the lead to collaborate on a project. Once partners have accepted the invitation, they will be asked to login or to create an account in the IFS. They are responsible for entering their own project costs in the application.
To be an eligible collaboration:
the lead and at least one other organisation must request funding
you must explain why you’re collaborating and how the collaboration will work
no single organisation can claim more than 70% of the total project costs
Non-funded partners
Your project can include organisations who do not claim any funding for their work on the project. Their costs will be covered from their own resources. These can include UK, EU and other non-UK organisations. Non-UK partners are permitted to carry out project work from within their home countries and exploit the results outside the UK.
Where non-funded partners have been invited to the application on IFS, their costs will count towards the total eligible project costs.
Subcontractors
Subcontractors are allowed in this competition.
Subcontractors can be from anywhere in the UK and you must select them through your usual procurement process.
You can use subcontractors from overseas but must make the case in your application as to why you cannot use subcontractors from the UK.
You must provide a detailed rationale, evidence of the potential UK contractors you approached and the reasons why they were unable to work with you. We will not accept a cheaper cost as a sufficient reason to use an overseas subcontractor.
All subcontractor costs must be justified and appropriate to the total project costs.
Number of applications
A UK registered business can lead on one application and be included as a collaborator in any number of applications.
An academic institution, research and technology organisation (RTO), charity, not for profit or public sector organisation can collaborate on any number of applications.
Sanctions
This competition will not fund you, or provide any financial benefit to any individual or entities directly or indirectly involved with you, which would expose Innovate UK or any direct or indirect beneficiary of funding from Innovate UK to UK Sanctions. For example, through any procurement, commercial, business development or supply chain activity with any entity as lead, partner or subcontractor related to these countries, administrations and terrorist groups.
Use of animals in research and innovation
Innovate UK expects and supports the provision and safeguarding of welfare standards for animals used in research and innovation, according to best practice and up to date guidance.
Applicants must ensure that all of the proposed work within projects, both in the UK and internationally, will comply with the UKRI guidance on the use of animals in research and innovation.
Any projects selected for funding which involve animals will be asked to provide additional information on welfare and ethical considerations, as well as compliance with any relevant legislation as part of the project start-up process. This information will be reviewed before an award is made.
Previous applications
You can use a previously submitted application to apply for this competition.
If you have previously submitted an application that reached our assessment stage, you can re-apply once more with the same proposal.
If there are minor differences to the proposal, but it is judged by us to be ‘not materially different’, the same rule applies.
We will not award you funding if you have:
failed to exploit a previously funded project
an overdue independent accountant’s report
failed to comply with grant terms and conditions
Innovate UK may withhold a grant payment at any time if you have any outstanding sums due to us in relation to other projects.
Subsidy control (and State aid where applicable)
This competition provides funding in line with the Subsidy Control Act 2022. Further information about the Subsidy requirements can be found within the Subsidy Control Act 2022.
Innovate UK is unable to award organisations that are considered to be in financial difficulty. We will conduct
Your proposal
The aim of this competition is to:
support collaborative R&D in strategically critical areas of the UK battery value chain
strengthen UK capability in battery cell manufacturing, pack manufacturing including high performance cell technologies, automated manufacturing techniques, non-destructive testing, AI driven design and simulation of manufacturing processes
strengthen UK supply chain security and build resilient, multi-sector manufacturing capability
support supply chain localisation to align with rules of origin requirements and UK’s strategic priorities
This is to address key capability gaps limiting the UK’s ability to:
scale UK battery cell manufacturing
develop UK battery module and pack manufacturing
improve battery systems
capture greater economic value domestically
Your project must demonstrate how the proposed innovation will do at least one of the following:
enable improvements to manufacturing processes for large-scale battery cell production
expand industrial development of battery module technologies
develop high performance and efficient battery pack and battery management system (BMS) technologies
reduce dependence on overseas cell and pack manufacturers and strengthen UK supply chain resilience
demonstrate the results of AI supported design across cell and pack development
support scale-up from laboratory to pilot and pre-commercial manufacturing within the UK
Your project must demonstrate a credible pathway and deliver value-add to the UK, for example:
scale-up and manufacturing deployment for battery cells in the UK
creation or expansion of UK cell manufacturing technologies
development or expansion of UK high performance cell and module technologies
creation of high performance battery packs and battery management systems
creation or expansion of industrial capability, facilities or production capacity across the battery value chain
strengthening UK supply chain resilience across both cell manufacturing and pack manufacturing
delivery of long term economic and environmental benefits, aligned with net zero objectives
Your R&D activities can include, but are not limited to:
improved efficiency and CO2 reduction or offset from battery cell manufacturing processes
automated cell manufacturing technologies
development of dry coating methods
end of line testing technologies
development of modular and replicable module and cell systems
next generation AI supported BMS systems
efficient module and pack joining methods
structural battery packs
utilisation of lightweight materials in battery packs
digital tools to accelerate experiment design
Your project must clearly state which group your application aligns with:
1. Cell manufacturing
Innovations that strengthen UK competitiveness in cell manufacturing
We encourage projects that:
enable scale-up from laboratory to gigafactory levels to expand UK large scale cell manufacturing capacity
integrate digital tools, in-line diagnostics, and digital twins to optimize efficiency and reduce scrap
reduce energy demand, waste, and environmental impacts across cell production
support the industrialisation of new cell chemistries and formats, pouch, cylindrical, prismatic
integrate design for manufacturing approaches to improve yield and reliability
advance electrode fabrication, cell assembly, and formation processes
produce high performance stacking and winding patterns
increase the speed of tab and enclosure joining
improve solid electrolyte interface (SEI) layer consistency at high production rates
develop novel ageing and testing capabilities to reduce conditioning time
develop tools, equipment, and automation solutions for production efficiency
deploy digital tools such as AI to improve cell development time
2. Module Manufacturing
Innovations that strengthen UK competitiveness in module manufacturing
We encourage projects that:
advance cell to module interconnect fabrication, structural bonding, and module housing assembly
produce high performance busbar configurations for example automated laser welding patterns
increase the speed and precision of cell positioning, clamping, and electrical joining
improve the consistency of thermal interface material (TIM) application at high production rates
develop novel end of line (EOL) electrical testing and insulation monitoring
3. Pack Manufacturing and Battery Management Systems (BMS)
Innovations that strengthen UK competitiveness in pack manufacturing
We encourage projects that:
innovate in pack design, structural systems, or fast assembly techniques
improve safety systems, early warning diagnostics and fault tolerant designs
develop advanced BMS functionality, state of health or state of charge algorithms
create thermal management innovations including new materials, architectures or control systems
apply simulation, digital twins or data driven optimisation for real world performance
enable circularity ready or end of life friendly design
implement digital tools such as AI to improve performance and safety
support application specific optimisation for automotive, aerospace, maritime, rail, defence or stationary storage
Your project can target performance requirements for at least one of the listed sectors and can support emerging use cases or cross sector applicability including:
automotive sector including on and off-highway vehicles, motorsports and niche automotive
aerospace
battery energy storage systems
rail
maritime
defence, the innovation must be dual use with clear relevance beyond defence application
You must clearly demonstrate your understanding of the target sector and industry and market demand covering UK, Europe and global in your application.
Portfolio approach
We want to fund a variety of projects across different technologies, costs, markets and technological maturities. All project costs will be assessed to ensure strong value for money. Applicants requesting higher levels of funding should expect proportionate scrutiny and must provide clear justifica
11 September 2026
Competition opens
16 September 2026
Online briefing event: register to attend
Briefing slides will be available to download from Supporting Information after the event.
2 December 2026 11:00am
Competition closes
13 January 2027
Invite to interview
3 February 2027
Interview panel
12 February 2027
Applicants notified
1 May 2027
Project start from
Before you start
You must read the guidance on applying for a competition on the Innovation Funding Service before you start.
Before submitting, it is the lead applicant’s responsibility to make sure:
that all the information provided in the application is correct
your proposal meets the eligibility and scope criteria
all sections of the application are marked as complete
that all partners have completed all assigned sections and accepted the terms and conditions (T&Cs)
You can reopen your application once submitted, up until the competition deadline. You must resubmit the application before the competition deadline.
What we ask you
The application is split into three sections:
Project details.
Application questions.
Finances.
Accessibility and Inclusion
We welcome and encourage applications from people of all backgrounds and are committed to making our application process accessible to everyone. This includes making reasonable adjustments for people who have a disability or a long-term condition and face barriers applying to us.
You can contact us at any time to ask for guidance.
We recommend you contact us at least 15 working days before this competition’s closing date to allow us to put the most suitable support in place. The support we can provide may be limited if you contact us close to the competition deadline.
You can contact Innovate UK by email or call 0300 321 4357. Our phone lines are open from 9am to 12pm and 2pm to 5pm UK time, Monday to Friday (excluding bank holidays).
1. Project details
This section provides background for your application and is not scored.
Application team
Decide which organisations will work with you on your project and invite people from those organisations to help complete the application.
Application details
Give your project’s title, start date and duration.
Research category
Select the type of research you will undertake.
Project summary
Describe your project briefly and be clear about what makes it innovative. We use this section to assign the right experts to assess your application.
Your answer can be up to 400 words long.
Public description
Describe your project in detail and in a way that you are happy to see published. Do not include any commercially sensitive information. If we award your project funding, we will publish this description. This can happen before you start your project.
Your answer can be up to 400 words long.
Scope
Describe where your technology primary fits in the development group in the scope section, for example 1, 2 or 3.
Describe how your project fits the scope of the competition. If your project is not in scope, it will not be eligible for funding.
Your answer can be up to 400 words long.
2. Application questions
The assessors will score all your answers apart from questions 1 to 7 and 17 to 21. You will receive feedback for each scored question. Find out more about how our assessors assess an
Änderungsverlauf
First seen 15 Nov 2026, last checked 22 Nov 2026. 1 recorded version.
- 15 Nov 2026 · 0b00a3d89c03